Assembly Instruction – LC Angle Base – OUTDATED!!!

Assembly Instruction for LC Angle Base

1. Attach the magnet sticker from the outside (see the picture in Manual) of the board with three nuts M6. If you have an older version of the LC Ease, cut the corner of the magnet.
2. Click the second board to the end of bolts.
3. Screw in three bolts to the nuts. Ends of bolts must be in one line.
4. Using the magnet, attach the LC Angle Base to the LC Ease. Now your LC Angle Base is ready for work.

Download the manual:

manual_lc-angle-base-en-2017

Lucy Clay Tools guide
www.lucyclay.com/tools