LC Slicer V5 - Grey - Limited Edition

THE ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM THE ONE SHOWN IN IMAGES / VIDEOS

LC Slicer redesigned 2022 Version 5 is an updated version of the bestseller LC Slicer. It allows you to cut very thin slices of polymer clay with minimal distortion.

New Version 5 features

✅ Easy to assemble, you just need to screw together the frame and the slicer is ready.

✅ Fits a cane with size up to:
height - 4.72″/120 mm approx.
width - 4.72″/120 mm approx.
depth - 4.3″/110 mm approx. (cutting range 3.2″/80mm)

✅ The smallest gap between the blade and the backstop support is now only about 1.18″ (3cm).

✅ Compatible with new updated LC Angle Base (order separately, or in a set LC Slicer + LC Angle Base), which allows to fill the gap up to 0″ and provides additional functionality (cutting at an angle).

✅ LC Ease with a grid was replaced with a big knob.

✅ Constantly thin slices: turn the back knob (full or 1/2) to move the platform forward by 1 or 1/2 mm (0.04-0.02").

✅ In case of damage or wear of any part, it is not a problem to ask LC Tools to send a spare part.

Technical specification:

Approximate total dimensions (assembled): WHD  8.11" x 10" x 8.4"/20.6 x 25.5 x 21.3 cm

Weight: 4.43 lbs/2008 g

Please Note:  Cutting clay with glitters may cause vertical scratches on the surface of the clay.

In a few simple steps, anybody can put it together and start slicing polymer clay: ASSEMBLY INSTRUCTIONS FOR LC SLICER V5

3D Animation: LC Slicer V5

Assembly instructions and tips:

Overview of all LC Slicer models: www.lucyclay.com/blog/redesigned-lc-slicer-v5-and-lc-angle-base-v5

Assembly instruction:  ASSEMBLY INSTRUCTIONS FOR LC SLICER V5

Warning: LC Slicer includes a very sharp blade and is not appropriate for children!