Copyright © 2013 - 2018 - LC Tools s. r. o.
Address: P. O. Box 20, 318 00 Pilsen, Czech Republic
0 - 18 mm (0.7'')
LIFETIME BEARING SOLUTION
GEAR RATIO: 1 : 2
SPACE UNDER ROLLERS
15 CM / 6''
main features - SQUIRREL 2020
Stainless steel rollers ensure even longer lifetime.
Longer linear sliders extend the gap between the rollers to up to 18 mm (0.7”).
Upgraded cleaning blades
are even easier to remove and clean.
Upgraded Oldham clutch Now is made of metal and is even more robust.
Stainless steel handle easy to crank.
Strong magnets allow to effortless attach and detach the Machine off the table.
7 metal bearings
allow effortless and smooth cranking.
The gap between rollers from 0 up to 18mm (0.7”) allows you to condition the whole block of clay.
Well-engineered gears allow smooth and effortless turning by the handle.
High-end materials and robust construction ensure reliability and extended lifetime.
It can be placed anywhere on your desk/work table.
The machine is equipped with a hexagonal adapter and might be used with a cordless drill.
What is LC Machine?
LC machine is a high-end pasta machine designed for conditioning polymer clay. LC Machine was designed in cooperation with engineers and polymer clay community, that is why it is well-engineered and handy for clayers. LC Machine meets even the highest expectation of polymer clay artists and can be helpful for clayers with special needs.
What is an accu-drive solution?
Based on our experience using a cordless drill with the Czextruder, it is an ideal solution in terms of performance, price, practicality, and versatility. The drill is connected via a hexagonal adapter (included in the package) and speed is then adjusted by hand. The LC Machine requires approximately 280 - 350 rpm (Rotations Per Minute). Please check your drill’s specifications to make sure that you don’t surpass the maximum rotation speed of 350 rpm.
How will the LC Machine be packed? Will there be assembly after unboxing?
Our goal is for you to have as little assembly as possible. Currently, we are offering a fully assembled version of LC Elephant and party assembled LC Squirrel. Please watch the Video of unboxing and assembling LC Machine Squirre.
How will the LC Machine be secured to the work surface?
The base of the LC Machine will be equipped with 4 special strong magnets. You will attach the metal magnet pads to your table with double-sided tape, which is included in the package. Alternatively, you can screw the metal magnet pads to your table.
Another option is to countersink magnets into your table and screw the pads onto the base of the LC Machine. The principle is the same. Four strong magnets on your table could also be useful for holding other instruments in place.
Once your work is done, you can easily detach your LC Machine from the magnetic pads with one movement. Of course, the pad could serve as a coaster for your coffee mug in the winter!
A final option is to place the LC Machine on the edge of the work surface and secure it using C-clamps. C-clamps are sold at hobby stores and hardware stores. They are not included in the package of LC Machine because we don’t want to sell you something you don’t need or already have.
What are the supporting bolts for?
The gap is set by an aluminum knob/wheel. Two black supporting screws prevent the roller frame from sagging under pressure. Thanks to this you can set up gap up to 18 mm.
When/How to clean the LC Blades / cleaner blades?
During use, clean the cleaner blades on the rollers from time to time and whenever needed. Watch the video Cleaning the cleaner blades.
What is the difference between Squirrel and Elephant model?
The major difference is in positions of the device on the tabletop - due to dimensions of the devices and the crank, you can place Squirrel anywhere on your table. The Elephant can be placed only at the edge of the table. The Elephant model is no longer in the production.
How to proceed if my LC Machine was delivered damaged?
Never accept a parcel that is crushed, damaged or has been left open without asking a report from the postman/delivery service. If you receive it damaged, please inform us directly at firstname.lastname@example.org before sharing it on the Internet.
How / Where to complain?
If you are having any trouble with your LC Machine, feel free to contact us at email@example.com. If possible, attach a photo/video documentation.
What is the VIP Club? How to join VIP Club?
The LC VIP Club is a membership-based club for our savviest customers. Members will have access to the exclusive offers and discounts. If you own a Lucy Clay Machine, please register your device and join the Facebook group LC Machine owners https://www.facebook.com/groups/lcmowners/ and you will automatically become a member of the VIP Club.
POSITION ON THE WORK TABLE