LC Machine for polymer clay Baby Squirrel

ACTUAL PRODUCT MAY DIFFER SLIGHTLY FROM THE ONE SHOWN IN IMAGES / VIDEO

About LC Machine.

LC Machine Baby Squirrel is the smaller version of LC Machine Squirrel. This Baby is smaller and lighter but has the same functionality as its bigger "brother" Squirrel.

An adjustable gap between rollers (0.5-18mm) allows for conditioning an entire bar of the polymer clay. The Machine is equipped with a hexagonal adapter and can be used with a cordless drill. A magnetic clamping solution allows you to fix the Machine on a desk.

Differences between LCM Squirrel and LCM Baby Squirrel

The differences are:

✅ Size - Baby Squirrel is smaller (see the chart below for more specifications).

✅ Weight - Baby Squirrel is lighter, Baby Squirrel weighs 7kg/15.4lbs, Squirrel is 8kg/17.6 lbs.

✅ Baby Squirrel can be placed only on the edge of a table, Squirrel can be placed anywhere on the table.

✅ Width Adjuster is NOT compatible with Baby Squirrel.

✅ Price - Baby Squirrel has a lower price than a Squirrel.

Please check this chart to see precise differences and features:

	Squirrel	Baby Squirrel
Rollers length	20 cm / 7.9''	15 cm / 5.9''
The gap between the rollers	0 - 1.8 cm / 0.7''	0 - 1.8 cm / 0.7''
Length (without handle)	37 cm / 14.5''	32 cm / 12.5''
Width = width of the leg	21 cm / 8.3''	18 cm / 7''
Height = height of the leg	26.5 cm / 10.5''	20.5 cm / 8''
Space under the rollers	15.5 cm / 6''	9.5 cm / 3.8''

LC Machine Baby Squirrel main features:

Stainless steel rollers - ensure even longer lifetime
Longer linear sliders - extend the gap between the rollers to up to 18 mm (0.7”).
Upgraded cleaning blades are even easier to remove and clean.
Upgraded Oldham clutch - now is made of metal and is even more robust.
Stainless steel handle - easy to crank.
Strong magnets allow you to effortlessly attach and detach the Machine off the table
10 metal bearings allow for effortless and smooth cranking.
The gap between rollers from 0mm up to 18mm (0.7”) allows you to condition the whole block of clay
It can be placed on the edge of the table.
The machine is equipped with a hexagonal adapter and might be used with a cordless drill.
High-end materials and robust construction ensure reliability and extended lifetime.

Technical Specifications:

Min/max gap thickness of clay plate 0,5mm to 18mm.
Position in the workplace: at the age of the desk.
Material: aluminum frame, plastic covers, stainless steel rollers
Runout of the rollers up to 0.3mm/0.012″
Instructions for use: click here

The package contains:

LC Machine (1pc)
Crank handle (1pc)
Hex-end extension (Cordless drill adapter) (1pc)
Rest pads for Lucy Clay Machine (4pcs)
Double-sided tape (1pc)
LC Lubricant
LC Machine ruler (1pc)

Shipping and packaging:

LCM Squirrel is packed in one cardboard box dismantled in 3 main parts (baseboard, machine, leg/support plus necessary screws). It is very easy to put it all together by only 12 small screws in a few minutes. Watch the video below.