LC Disk 11 is great for making patchwork patterns. Discover what possibilities this disc can offer.
8-POINT STAR PATTERN
Step 1
Prepare 2 extensions from LC Disk 11 and polymer clay in pink and white color.
Step 2
Put the pink clay in the Czextruder and extrude it through the star disc. Then extrude the white clay through the cross disc.
Step 3
Cut all extrusions into the same pieces (about 5 – 10 cm long). Start assembling your cane.
Step 4
Slice the pattern using LC Slicer or LC Mini Slicer.
DIAMOND CANE
Step 1
For this pattern, you will only need one disc from LC Disk 11. Prepare polymer clay in four colors. I used black, white, red and violet.
Step 2
Extrude clay through the disc. Cut all extrusions into smaller pieces.
Step 3
Assemble the cane. You can see that the same colors do not touch each other.
Step 4
Slice your cane. You can use LC Slicer or LC Mini Slicer to make more even slices.
CANE WITH 3D-EFFECT
Step 1
For this pattern, you will need a trapezoid disc from LC Disk 11 and square discs from LC Disk 2 and LC Disk 6. Prepare clay in four colors – white, yellow, dark pink. and light pink.
Step 2
Extrude yellow clay through the square disc (LC Disk 2), white through the square disc (LC Disk 6), and dark pink and light pink through the trapezoid disc.
Step 3
Take the pink extrusions (of both shades) and press them together to form a V shape. Place the yellow extrusion between them to form a square cane.
Step 4
Make a bigger cane.
Step 5
Slice the cane and use it in your project.
PATCHWORK CANE 1
Step 1
For the first patchwork cane, you will need a small triangle disc and a triangle expansion disc from LC Disk 11. Prepare polymer clay in two contrast colors – I used green and white clay.
Step 2
Extrude both colors through both discs. Cut extrusions into smaller pieces.
Step 3
Take one green triangle extrusion and place it on the white triangle expansion extrusion. Proceed the same with extrusions in reverse colors. Make more triangle canes this way.
Step 4
Press four triangle canes together to make a square cane. Make more square canes and press them together.
Step 5
Slice the cane.
PATCHWORK CANE 2 (STAR)
Step 1
For this patchwork star cane, you will need only one disc – a triangle (small or big) disc from LC Disk 11. You will also need clay in two colors. I used white and pink.
Step 2
Extrude white and pink clay through the triangle disc. Cut all the extrusions into smaller pieces.
Step 3
Make canes – press together one white extrusion and one pink extrusion.
Step 4
Start making the cane – rotate canes to create a star pattern.
Step 5
Before using the cane in your project, slice it with LC Slicer or LC Minislicer.
SPIDERWORT CANE
Step 1
Prepare a flower from LC Disk 1 and a matching disc from LC Disk 11. I used white, violet, and pink clay.
Step 2
Put white clay into the Czextruder, use the flower disc from LC Disk 3, and extrude clay. Then extrude violet and pink clay through the other disc.
Step 3
Place white extrusion between one violet and one pink extrusion.
Step 4
Press more canes together to make a bigger cane.
Step 5
Cut thin slices. You can use LC Slicer or LC Mini Slicer.
STAR CANE
Step 1
Prepare these two extensions, a rhombus disc from the LC Disk 11, and a square disc from LC Disk 5. You will also need clay in three colors. I used green, red, and white.
Step 2
Extrude green and red clay through the rhombus disc and white through the square disc. Cut all the extrusions into smaller pieces.
Step 3
Take red and green extrusions and press them together to form a V shape. Place the white extrusion between them.
Step 4
Take four canes and press them together to form a star cane. Roll the cane in your hands to achieve a round-shaped cane.
Step 5
Before using the cane in your project, slice it with LC Slicer or LC Minislicer.
PATCHWORK CANE 3
Step 1
Prepare two triangle extensions from LC Disk 11, polymer clay in yellow, dark violet, and light violet.
Step 2
Extrude the yellow clay through the bigger triangle disc and violet (both shades) clay through the smaller triangle disc.
Step 3
Cut all extrusions into the same pieces (about 5 – 10 cm long). Press together two violet extrusions. Add yellow extrusion to form a square cane.
Step 4
Press these eight canes together to create a bigger cane.
Step 5
Slice the pattern using LC Slicer or LC Mini Slicer.
RHOMBUS CANE
Step 1
Prepare an L disc from LC Disk 11, a square disc from LC Disk 2, and polymer clay – blue, gray, and white.
Step 2
I extruded gray and blue clay through the L disc and white clay through the square disc.
Step 3
Cut all extrusions into smaller pieces. Place the white extrusion between one blue extrusion and one gray extrusion. Then make a bigger cane.
Step 4
Slice your cane. You can use LC Slicer or LC Mini Slicer to make more even slices.
COMPLEX PATTERN
Step 1
Prepare these two discs from the LC Disk 11 and polymer clay in four colors. I used three shades of violet clay and white clay.
Step 2
Extrude the white clay through the small triangle disc and purple clay through the other disc.
Step 3
Cut the extrusion into small pieces (about 1 cm long)
Step 4
Start assembling the pattern. Take two (violet) extrusions. Place them so that the top of one extrusion touches the center of the other extrusion.
Step 5
Make the whole clay this way. You can see that the same shades do not touch each other.
Download PDF tutorials for free: lcd11-patterns-from-czextruder-PDF
Leave A Reply